LMV321TP/358TP/324TP are CMOS single, dual, and quad op-amps with low offset, stable highfrequency response, low power, low supply voltage, and rail-to-rail inputs and outputs. They incorporate 3PEAK’s proprietary and patented design techniques to achieve best in-class performance e among all micro-power CMOS amplifiers.

The LMV321TP/358TP/324TP is unity-gain stable under Any Capacitive Load with 1.27 MHz gainbandwidth product, 0.9 V/μs slew rate while consuming only 40 μA of supply current per amplifier. Beyond the rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. This combination of features makes the LMV321TP /358TP/324TP superior among rail-to-rail input /output CMOS op-amps in its power class.

The LMV321TP/358TP/324TP family is an ideal choice for battery-powered applications because they minimize errors due to power supply voltage variations over the lifetime of the battery and maintain high CMRR even for a rail-to-rail input op-amp.

Features

 Stable 1.27 MHz GBWP with Low IQ of Only 40μA Typical per Amplifier

 0.9 V/μs Slew Rate

 Offset Voltage: 3.5 mV Maximum

 Offset Voltage Temperature Drift: 0.6 μV/°C

 Input Bias Current: 1 pA Typical

 Beyond the Rails Input Common-Mode Range

 Outputs Swing to within 5 mV Typical of each Rail

 No Phase Reversal for Overdriven Inputs

 Single +2.1 V to +6.0 V Supply Voltage Range

 −40°C to 125°C Operation Range

Applications

 Active Filters, ASIC Input or Output Amplifier

 Sensor Interface

 Smoke/Gas/Environment Sensors

 Portable Instruments and Mobile Device

 Audio Output

 Battery or Solar Powered Systems

 Medical Equipment

 Piezo Electrical Transducer Amplifier